Loading A Sound; Saving A Sound; The Sound Menu; Setup - Elektron Syntakt User Manual

Hide thumbs Also See for Syntakt:
Table of Contents

Advertisement

Adjust the overall volume level of the active audio track with the LEVEL/DATA knob.
Edit a sound by adjusting the parameters found on the PARAMETER pages. Access these pages by
pressing a [PARAMETER] page key. Use the DATA ENTRY knobs A-H to change the parameters. For more
information, please see "10. AUDIO TRACK PARAMETERS" on page 48.
The complete sound, with all its parameter settings may be copied to another track. Press [TRK] + [RE-
CORD], and then press [TRK] + one of the [TRIG] keys to select the track you want to copy the sound to,
and finally press [TRK] + [STOP] to paste the sound to the selected track.

8.4 LOADING A SOUND

To load a sound, use the SOUND BROWSER or the SOUND MANAGER. For more information, please see
"8.6.2 SOUND BROWSER" on page 31 and "8.6.3 SOUND MANAGER" on page 32.

8.5 SAVING A SOUND

After you edited the parameters of a sound, you can save it to the +Drive.
1. Press [FUNC] + [SONG MODE] to open the MANAGE menu.
2. Select SAVE SOUND, and then press [YES].
3. Turn the LEVEL/DATA knob or use the [UP]/[DOWN] keys to select an empty slot to where you want
to save your sound, and then press [YES]. If you want to save your sound to another bank, press
[BANK] + [TRIG 9–16] to select a bank.
4. On the NAMING screen, name your sound and then press [YES]. For more information, please see
"7.8 THE NAMING SCREEN" on page 22.
5. On the TAGS screen, use the [ARROW] keys and [YES] key to select the appropriate tags for your
sound, and then select <SAVE> and press [YES].

8.6 THE SOUND MENU

Press [FUNC] + [SONG MODE] to open the SOUND menu. Here you can set a number of Sound related
parameters. Use the [UP] and [DOWN] arrow keys to move between the options. Press [YES] to confirm
your selection. Press [NO] to exit the menu.

8.6.1 SETUP

Here you can set a number of Sound related parameters. Use the [UP] and [DOWN] arrow keys to move
between the options. Press [YES] to confirm your selection. Press [NO] to exit the menu.
FILTER KEYTRACK
Sets how much the filter opens and closes in relation to what note is played.
8. PATTERNS AND SOUNDS
29

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Syntakt and is the answer not in the manual?

Table of Contents

Save PDF