Advertisement
ESSEX ROMAN ARCH
PARTS LIST
(2) Curved Panels
(2) Upper Panels
(2) Lower Panels
(4) Ground Stakes
(6) M8 Hex Screw
(2) M8 Nut
NOTE: Assembly is best with two people. It is easiest to assemble your arch on the ground and
then tip it up when complete. Choose a flat, clean surface to execute your assembly.
TIP: Hand tighten all bolts until the whole unit is assembled. Straighten parts and make sure
alignment is square. Then tighten all nuts with the wrench.
1. Align the curved panels and assemble with the screws and nuts provided.
TOOLS REQUIRED (2)
Wrench 12-13
Curved Panels
Over please
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Gardener's Essex Roman Arch
Summary of Contents for Gardener's Essex Roman Arch
- Page 1 ESSEX ROMAN ARCH PARTS LIST TOOLS REQUIRED (2) (2) Curved Panels Wrench 12-13 (2) Upper Panels (2) Lower Panels (4) Ground Stakes (6) M8 Hex Screw (2) M8 Nut NOTE: Assembly is best with two people. It is easiest to assemble your arch on the ground and then tip it up when complete.
- Page 2 M8 Hex Screw & Nut Upper Panels M8 Hex Screw 2. Align the assembled arch with the upper panel and hand tighten the screws as shown; repeat the same on the other side. Lower Panels 3. Insert the lower panel on one side and repeat on the other side. Ground Stakes 4.
Need help?
Do you have a question about the Essex Roman Arch and is the answer not in the manual?
Questions and answers