Vine Trellis for Gardener's Victory
Self-Watering Patio Planter
Parts List
(6) POLES
(4) POLE CONNECTORS
(2) CAPS
(2) TIE DOWN SYSTEMS
(6) HOOK & LOOP STRIPS
NOTE: These instructions refer to the BASKET, PLANTER, CAPILLARY STRIP and GROW BAG that are part
of the Victory Self-Watering Patio Planter (sold separately).
BASKET
POLES (smooth side
facing towards the center)
PLANTER
PLANTER
(without
basket)
1. Remove the BASKET from your empty
PLANTER and insert two POLES into the
slots on the inside (smooth sides facing
towards the center of the PLANTER).
BASKET (Bottom)
tabs should be visible
when fully secure
2. Slide the BASKET over the POLES and
back on top of the PLANTER. Press it
securely into place. NOTE: If the BASKET
doesn't have the CAPILLARY STRIP and
GROW BAG installed already, do that now
following the Patio Planter instructions.
#8600603
(1) TOP TRELLIS PANEL
(2) BOTTOM TRELLIS PANEL
(2) CONNECTING CLIPS
the POLES should
look like this when
inserted correctly
NOTE: The POLES will slide 1/2" into the
slots in the PLANTER.
water fill holes
BASKET
PLANTER
3. Slide the TIE DOWN SYSTEMS into the
slots on each POLE. NOTE: If you prefer,
the TIE DOWNS can be added to the upper
POLES during Step 5. Secure the ends of
the TIE DOWNS to prevent your PLANTER
from tipping over in high winds.
8% of our profits
Learn more at gardeners.com/
POLE
inside PLANTER
POLE
TIE DOWN
SYSTEM
go back to our communities.
FoRCE-FoR-GoOD
1-800-876-5520 • gardeners.com
info@gardeners.com
slot
4. Mix 1 cup of fertilizer into 40 quarts of
potting mix and pre-moisten. Fill your
PLANTER to within 1" to 2" of the top
edge. NOTE: We recommend our Organic
Self-Watering Potting Mix, as well as a
slow-release granular fertilizer, such as our
All Purpose Fertilizer.
1364G Rev 01/20
Need help?
Do you have a question about the 8600603 and is the answer not in the manual?
Questions and answers