Vertically Mounting The Ap To A Wall - Cisco Catalyst 9124AX Series Hardware Installation Manual

Installation Overview
AP Mounting Kit
AIR-MNT-ART1=
AIR-MNT-HORZ1=
AIR-ACC-PS-MNT1
(Optional)
AIR-MNT-STRAND1=
3
Note
• When mounting an AP vertically, ensure that the AP is oriented with the LED indicators pointing down.
• Mount the AP in such a way that all antenna ports and the console port are visible and accessible for
• Align the AP's omnidirectional antennas vertical to the ground.
• Align the AP's directional antenna such that the main beam is parallel to or tilted down toward the

Vertically Mounting the AP to a Wall

The AIR-MNT-VERT1= mounting kit contains a mounting bracket for wall mounting or pole mounting.
You can use the mounting bracket as a template to mark the mounting holes' positions for your installation,
install the mounting bracket, and then attach the AP to the bracket.
3
9124AXI
Mount the AP using no less than four screw holes on a bracket. For the AIR-MNT-STRAND1= bracket,
use no less than two screws.
future use.
horizon.
Cisco Catalyst 9124AX Series Outdoor Access Point Hardware Installation Guide
9124AXD Purpose
Pivoted mounting kit for both vertical and
horizontal mounting, on wall and for pole of
diameter 2 to 5 inch (51 to 127 mm). See:
Y Y Articulating Mount for the AP to a Wall, on page
33
Articulating Mount for the AP to a Pole, on page
37
Fixed mounting kit, allowing mounting the AP to
mounted horizontal to the ground. Horizontal
mount to a wall or for pole of diameter 2 to 5 inch
(51mm to 127 mm). See:
Pole Mounting the AP with Horizontal Kit, on
page 41
Y Y
Wall Mounting the AP with Horizontal Kit, on
page 39
Optional AIR-ACC-PS-MNT1 kit to mount DC
power supply. See:
DC Supply Mount Bracket, on page 43
Cable strand horizontal mount. See:
Y Y
Strand Mounting the AP, on page 45
Vertically Mounting the AP to a Wall
25