Cisco Catalyst 9124AX Series Hardware Installation Manual page 50

Pole Mounting the AP with Horizontal Kit
Figure 37: Pole Mounted Horizontal Kit (AIR-MNT-HORZ1=)
1 L-Bracket
2 Solar Shield
3 (4) M6 x 12–mm Hex-head Bolts
4 (4) 8-32 x 0.62" Phillips Pan Head Screw
5 (2) Adjustable Band Clamps 2 to 5 inch (51 to 127 mm) Dia. passing through the bracket slots
Before you begin
Ensure that you have the following materials before beginning to mount the AP horizontally to a pole:
Table 9: Materials Needed for Mounting the AP using AIR-MNT-HORZ1= Kit
Materials Required
Wall/Pole Mount L-Bracket
Solar Shield
(4) M6 x 12-mm Hex-head Bolts
(2) Adjustable Band Clamps 2 to 5 inch (51 to 127 mm) Dia
(4) 8-32 x 0.62" Phillips Pan Head Screw
Cisco Catalyst 9124AX Series Outdoor Access Point Hardware Installation Guide
42
Installation Overview
Supplied in the
Kit?
Yes
Yes
Yes
Yes
Yes