Using An In-Tile Mount From Oberon Wireless; Wall-Mounting The Ap - Cisco aironet 2800 series Deployment Manual

Using an In-tile Mount from Oberon Wireless

Using an In-tile Mount from Oberon Wireless
Figure 18: Oberon in tile and above tile mounting solutions
Additionally, Oberon offers a metal locking cabinet that allows the Access Point to be mounted flush to the
ceiling, which is often used in hospital infection control areas or places where higher physical security is
required.

Wall-mounting the AP

When wall mounting is desired, the installer should understand that walls can be a physical obstacle to the
wireless signal; therefore, maintaining 360–degree coverage may be compromised by the wall. If the wall is
an outside wall and/or the goal is to send the signal in a 180-degree pattern instead, a directional antenna often
Cisco Aironet Series 2800/3800 Access Point Deployment Guide
18
Physical Hardware and Mounting Options