Adjustment Of Clutch - Braaap CRUISER400 User Manual

Adjustment of Clutch

Adjustment of the clutch is required from time to time, depending on riding
conditions, and can
be influenced by heat. There should be always 3mm free play at the lever.
You need to adjust the clutch with the clutch cable adjuster.
There are two clutch cable adjusters on the Cruiser400.
The first is located to the right of the clutch lever on the left handlebar.
Clutch cable cover (1)
Clutch cable adjuster (2)
3mm free play (3)
The second is located on the right-hand side of the bike, just above the rider's
foot peg
Location:
Clutch Cable:
Measure the clearance of the clutch lever, which should be 2-3mm. If this
figure isn't correct, you must adjust it in the following ways:
(l) Loosen the lock nut.
(2) Turn in or turn out the adjustment, to let the clearance of the clutch lever
end be 2-3mm.
(3) Fasten the lock nut.
LUBRICATE YOUR CLUTCH CABLE AT ENTRY POINT TO THE
CLUTCH LEVER.
- 32 -