Abs Fault Codes, Cruiser400 - Braaap CRUISER400 User Manual

ABS Fault Codes, Cruiser400

Flash Times
1-1
1-2
2-1 2-2
2-3 2-4
3-1
3-2
4-1
4-2
5-1
5-2
6-1
6-2
Fault
Internal power supply failure of front
rim sensor
Internal power supply failure of rear
rim sensor
Coil open circuit
Short circuit of front rim speed sensor
Short circuit of rear rim speed sensor Check the connecting wires and plugs of the sensor, look for problems such as
Front rim speed sensor open circuit
Rear rim speed sensor open circuit
When driving front rim speed signal is
missing
When driving rear rim speed signal is
missing
ABS motor open circuit or missing
12V power supply
ABS solenoid valve without +12V
power supply
Check and repair
change ECU control box
change ECU control box
2-1 to 2-4, the front pressure maintaining, the front pressure
reducing, the rear pressure maintaining, and the back pressure reducing coil short
circuit or open circuit fault. Need to change the ECU control box
Check the connecting wires and plugs of the sensor, look for problems such as
short circuits, grounding, wire fraying, and broken skin, or replace the sensor.
short circuits, grounding, wire fraying, and broken skin, or replace the sensor.
Check the connecting wires and plugs of the sensor, look for problems such as
virtual connection or open circuit, pin withdrawal of the terminal, or replace the
sensor.
Check the connecting wires and plugs of the sensor, look for problems such as
virtual connection or open circuit, pin withdrawal of the terminal, or replace the
sensor.
Check whether the front rim sensor is installed in place. Is the fit with the ring gear
intact?
Check whether the rear rim sensor is installed in place. Is the fit with the ring gear
intact?
Check the power supply of the ABS motor pin of the wire harness or replace the
motor or the internal motor socket of the ECU, etc.
Check the wire harness or plug and 12V power supply
- 37 -