Description Of The Display Features - Braaap CRUISER400 User Manual

Description of the display features

Please refer to the above image for the corresponding description.
Left and right indicators (1)
Indicators will flash on the display while the indicator is activated.
ABS brake system indicator (2)
The indicator will display each time you first start the bike. The indicator will
disappear shortly after riding begins.
If there is an issue with the ABS braking system, the ABS light will flash a
code. The code corresponds to a potential issue. You can find a detailed
description of the known fault code issues as well as how to resolve them at
the end of the manual. However, if the light remains solid after the first few
hundred meters, this may indicate another issue. Please contact Braaap in that
event.
Water temperature (3)
It shows the temperature the motorcycle is running at. The water temperature
is known to fluctuate.
Fuel indicator (4)
Indicators will display how much petrol is in the motorcycle. It has a gauge
with five (5) bars and a percentage symbol (%). The percentage symbol will
provide a more detailed description of how much petrol is in the bike.
The red petrol light will display when the bike is nearing empty.
RPM (5)
RPM will display how many revs per minute the motorcycle is
running at. Note: each number on the display is multiplied by 1000.
E.g., 6 on the display will mean 6000RPM
Speedometer (7)
The speedometer will display the speed the rider's current speed in KMPH
Odometer (8)
The odometer shows the lifetime distance the Cruiser400 has travelled. This
cannot be changed.
Gear indicator (9)
Displays what gear the bike is in.
Trip meter (10)
Tripmeter can be reset so the rider can keep track of distances. Resetting the
trip meter is shown below.
Battery output (11)
Displays how much voltage the battery is putting out.
Oil light (12)
The bike only requires an oil change every 3000-4000km (except for initial
running-in 1000k's). Note: The oil light will display every 1000km. The oil
light can be turned off through the display. Turning off the oil light is shown
below.
- 12 -