Features; Left Handlebar - Braaap CRUISER400 User Manual

Left Handlebar

Clutch Lever (1)
When starting the engine or shifting gears, pull in the clutch lever
to cut the drive from the rear wheel
Passer (Red) (2)
Pressing the passer will cause the front headlight to quickly flick
between high beam and low beam. It is easier to use the passer to
flash someone than constantly flicking the high beam/low beam
headlight beam switch
Headlight Beam Switch (3)
When the beam switch is in the forward position, the high beam is
turned on. When the switch is turned to the near position, the low
beam is turned on.
Hazard Lights (4)
Flicking this switch on will activate the hazard lights.
Choke (5)
Slide the choke to the left, away from rider to activate. The choke is used to
reduce the amount of air in the fuel mixture to help the bike start.
Use choke on cold mornings or when the bike has not been started for some
time.
DO NOT ride with the choke on

Features

Turn Signal Indicator Switch (6)
When the turning switch is pushed to the left, the left indicator
will flash. When the turning switch is pushed to the right, the
right indicator will flash. To turn off the indicator, press the
indicator button in.
Horn Button (7)
When the motorcycle is on, pressing down on the horn button
will activate the horn.
- 15 -
Left handlebar top view
Left handlebar front view