Description Of The Display Features - Braaap MotoE 8000W User Manual

Description of the display features

Please refer to the above image for the corresponding description.
Similar to a Potentiometer (1)
The throttle is basically a potentiometer. The readout from that is your rev
counter, it basically duplicates the position of the throttle.
Reverse (2)
The reverse feature of this bike reverses the bike. To use: hold the reverse
button down to activate. You must continue to hold the reverse button down
when engaging the throttle to move the bike backwards.
High Beam (3)
The high beam blue indicator will display on the dashboard when the high
beam has been activated.
Indicators (4)
The indicator lights will flicker on the display when indicators are activated.
Battery Bar (5)
The battery bar will display the level of charge remaining in the battery. 5
bars mean the battery is full or charge, and 1 bar means the battery is low and
requires a charge.
Odometer (6)
The odometer is located to the left of the battery bar. This screen, at the
location of 6 & 7 on the display above will constantly flick between the
odometer and the battery volt indicator.
Battery Volt Indicator (7)
The battery volt indicator and odometer share a screen. The screen will
constantly flick between the two features.
The battery volt indicator displays how much charge remains in the battery.
Learn to read this as you begin to use your bike as it is an accurate way to
determine how much charge remains in the bike.
Speed in KMPH (8)
This will display the speed you are riding the bike at
Power Selection (9)
The power selection indicator shows which power setting the rider is in.
Power selection options are from 1-3.
Lights on (10)
This indicator will display whether your lights are on or not.
Kill Switch Engaged (11)
This indicator shows that a kill switch is engaged. The kill switch for the
MotoE 8000W is the side stand. If the side stand is down, the bike will not
begin to move. If you have the side stand down and pull down on the throttle,
the bike will make a noise to let you know something is wrong as well.
ECU (12)
The electric control unit indicator will display if the bike is registering a
problem with the unit. If this occurs, please get in touch with Braaap support
or take your bike to a registered mechanic.
Motor (13)
The motor indicator will display if the bike is registering a problem with the
unit. If this occurs, please get in touch with Braaap support or take your bike
to a registered mechanic.
- 11 -