Broadcast Storm Control Staus - ZyXEL Communications OLT2406 User Manual

Table 45 Advanced Application > Broadcast Storm Control (continued)
LABEL
Apply
Cancel

16.3 Broadcast Storm Control Staus

Use this screen to view the storm control statistics on a port.
Click Broadcast Storm Control Status in the Advanced Application > Broadcast Storm Control screen to
display the screen as shown next.
Figure 95 Advanced Application > Broadcast Storm Control > Broadcast Storm Control Status
The following table describes the labels in this screen.
Table 46 Advanced Application > Broadcast Storm Control > Broadcast Storm Control Status
LABEL
Index
Port
Counter
Logging
BcastDropCount
McastDropCount
DLFDropCount
Refresh
ClearCounter
Chapter 16 Broadcast Storm Control
DESCRIPTION
Click Apply to save your changes to the OLT's run-time memory. The OLT loses these changes if
it is turned off or loses power, so use the Save link on the top navigation panel to save your
changes to the non-volatile memory when you are done configuring.
Click Cancel to reset the fields.
DESCRIPTION
This field displays the index number of the entry.
This field displays the port number.
This field displays whether packet counting is enabled or not.
This field displays whether logging for broadcast storm control is enabled or not.
This field displays the number of broadcast packets dropped on this port.
This field displays the number of multicast packets dropped on this port.
This field displays the number of destination lookup failure (DLF) packets dropped on this port.
Click Refresh to update this screen.
Click ClearCounter to remove the counters on all ports.
OLT2406 User's Guide
151