Mercedes-Benz EQE 350+ Owner's Manual page 411

408 Wheels and tyres
408
Turn ratchet 3 until the tyre is raised a maxi-
#
mum of 3 cm from the ground.
Loosen and remove the wheel (
#
R R emo emoving a wheel ving a wheel
R R eq equir uirements: ements:
The vehicle is raised ( page 405).
R /
* NO NOTE TE Mercedes-AMG vehicles
Observe the notes in the Supplement.
#
You could otherwise fail to recognise
dangers.
When changing a wheel, avoid applying any force
to the brake discs, as this could impair the level of
comfort when braking.
* N N O O TE TE Damage to the wheels' plastic ele-
ments when changing a wheel
Plastic elements on wheels may be damaged
when removing and repositioning the wheel.
Do not raise the wheels by the plastic
#
elements when removing and reposition-
ing.
page 408).
/
* N N O O TE TE Damage to threading from dirt on
wheel bolts
Do not place wheel bolts in sand or on a
#
dirty surface.
Unscrew the uppermost wheel bolt com-
#
pletely.
Screw centring pin
#
of the wheel bolt.
#
#
F F itting a ne
R R eq equir uirements:
R
1 into the thread instead
Unscrew the remaining wheel bolts com-
pletely.
Remove the wheel.
itting a new wheel w wheel
ements:
The wheel to be changed is removed and the
centring pin is screwed in (
/
* NO NOTE TE Mercedes-AMG vehicles
Observe the notes in the Supplement.
#
You could otherwise fail to recognise
dangers.
& W W ARNING
ARNING Risk of accident from losing a
wheel
Oiled or greased wheel bolts can cause the
wheel bolts to come loose, as too can dam-
aged wheel bolts or wheel hub threads.
Never oil or grease the threads.
#
page 408).