Mercedes-Benz EQE 350+ Owner's Manual page 210

Combo 1 vehicle socket Combo 2 vehicle socket
Open socket ap 1 via the EQ module of the
#
multimedia system ( page 308).
/
or
Press the centre rear section of socket ap
#
1.
Socket ap 1 swings open and status display
2 lights up white.
Driving and parking 207
V V ehicles wit ehicles with an electr h an electric socke ic socket t ap:
cle impedes the electric socket ap while it is
opening, the socket ap closes again automati-
cally and the driver's display shows a correspond-
ing display message.
% When the vehicle is started (the õ display
is lit in the driver's display), socket ap
cannot be opened.
Remove socket cover 4 from the lower con-
#
nection of vehicle socket 3.
%
The CCS charging cable connector requires
both vehicle socket connections 3.
Insert the charging cable connector into vehi-
#
cle socket 3 to the stop.
Make sure that the charging cable is not taut
when inserted.
Status display 2 ashes orange and, as soon
as the high-voltage battery is charged, blue.
% When the charging sequence for the ambient
lighting is activated, the ambient lighting lights
up for approximately 30 seconds as with sta-
tus display 2 ( page 153).
/
207
ap: if an obsta-
1