Mercedes-Benz EQE 350+ Owner's Manual page 298

Bicycle r Bicy cle rac ack function k function
& W W ARNING
ARNING Risk of an accident if the bicy-
cle rack is used incorrectly
The bicycle rack may become detached from
the vehicle in the following cases:
the permissible load capacity of the trailer
R
hitch is exceeded.
the bicycle rack is used incorrectly.
R
the bicycle rack is secured to the ball neck
R
beneath the ball head.
Observe the following for your own safety and
that of other road users:
always adhere to the permissible load
R
capacity of the trailer hitch.
always observe the permissible rear axle
R
load of the towing vehicle.
use the bicycle rack only to transport bicy-
R
cles.
always mount the bicycle rack properly by
R
attaching to the ball head and the ball
neck guide pin, if possible.
when transporting four bicycles, always
R
use bicycle racks which have additional
support on the ball neck guide pin.
use only bicycle racks approved by
R
Mercedes-Benz.
always observe the bicycle rack operating
R
instructions.
* N N O O TE TE Damage to or breakage of the trailer
hitch due to unsuitable or improperly used
bicycle rack.
Only use bicycle racks approved by
#
Mercedes-Benz properly as described
below.
* N N O O TE TE Increased risk of damage to prop-
erty due to folded-out ball neck
When the trailer is not coupled or the
#
bicycle rack is attached, fold in the ball
Driving and parking 295
neck or, in the case of a fully electric
trailer hitch, retract the ball neck.
* N N O O TE TE The operating permit may be invali-
dated due to the illegal installation of
trailer hitches
The installation – including retro tting – of a
non-folding or non-removable trailer hitch that
even partially conceals the license plate or the
lighting system is prohibited.
Observe the applicable legal regulations
#
for the installation of trailer hitches.
295