Mercedes-Benz EQE 350+ Owner's Manual page 28

You must not tamper with wiring, elec-
#
tronic components, or their so ware.
Always have work on electrical and elec-
#
tronic devices carried out at a quali ed
specialist workshop.
If you modify the on-board electronics, the gen-
eral operating permit is rendered invalid.
Observe the "On-board electronics" section in
"Technical data".
* N N O O TE TE Impairment of the operating e -
ciency of the vehicle or individual compo-
nents due to tampering with the on-board
electronics
The vehicle is equipped by the manufacturer
with various safety mechanisms that interact
with each other.
If the system detects tampering with the on-
board electronics due to an unauthorised
modi cation of control units and/or their so -
ware/data, this may have the following
e ects:
Individual vehicle functions are (tempora-
R
rily) no longer operational.
The overall vehicle is (temporarily) no lon-
R
ger operational.
Have the vehicle checked immediately at
#
a quali ed specialist workshop and, if
necessary, reset to factory settings.
* N N O O TE TE Damage to the vehicle due to driv-
ing too fast and due to impacts to the
vehicle underbody and suspension com-
ponents
In the following situations, in particular, there
is a risk of damage to the vehicle:
the vehicle becomes grounded, e.g. on a
R
high kerb or an unpaved road
General notes
the vehicle is driven too fast over an obsta-
R
cle, e.g. a kerb, speed bump or pothole
a heavy object strikes the underbody or
R
suspension components
In situations such as these, damage to the
body, underbody, suspension components,
wheels or tyres and high-voltage battery com-
ponents may not be visible. Components dam-
aged in this way can unexpectedly fail or, in
the case of an accident, may no longer absorb
the resulting force as intended.
Have the vehicle checked and repaired
#
immediately at a quali ed specialist
workshop.
or
If driving safety is impaired while con-
#
tinuing your journey, pull over and stop
the vehicle immediately, while paying
attention to road and tra c conditions,
and contact a quali ed specialist work-
shop.
25 25