Using The Quick Connect Feature - GE SR345 Instruction Manual

SOFTWARE SETUP
Using the Quick
Connect feature
3–14
Courtesy of NationalSwitchgear.com
The Quick Connect button can be used to establish a fast connection through the front
panel USB port of a 345 relay, or through the Ethernet port. The following window will
appear when the QuickConnect button is pressed:
As indicated by the window, the "Quick Connect" feature can quickly connect the EnerVista
SR3 Setup software to a 345 front port if the USB is selected in the interface drop-down list.
Select "345 Relay" and press the Connect button. Ethernet can also be used as the
interface for Quick Connect as shown above.
When connected, a new Site called "Quick Connect" will appear in the Site List window.
345 TRANSFORMER PROTECTION SYSTEM – INSTRUCTION MANUAL
CHAPTER 3: INTERFACES