Advertisement
ACUSON P300™ Ultrasound System Quick Reference Guide
ACUSON P300™ Ultrasound System*
Quick Reference Guide – System Overview
Introduction
This Quick Reference Guide contains brief descriptions and instructions for the functions
most commonly used to perform 2D, M-mode and Doppler exams
This supplement is not a substitute for the system Operators Manual.
Contents
Exam Basics
2D Controls
Color, PW and CW Doppler and M-mode Optimization
Measurements and Calculations
Text and Pictograms
Data and Image Management
Exam Basics
The Power On/Off button
A solid yellow light will indicate the power is on.
The Battery option will allow the system to run on internal battery for 80 minutes
(scanning) or 120 minutes (standby).
Begin an Exam
Press START/END
Enter patient name, ID and other exam information
Press TAB to move between data fields
or
Roll the trackball to move to the next data field and press Right Select
Select the proper APPLICATION, PRESET and PROBE
Press Enter or select OK to start exam
Page | 1
© Siemens 2012. All rights reserved.
*The ACUSON P300 System is not commercially available.
Due to regulatory reasons its future availability cannot be guaranteed.
is located on the upper right side of the system.
Advertisement
