Advertisement
ACUSON P300™ Ultrasound System Quick Reference Guide
Move between active calipers (yellow) by pressing ACTION
Rotate S wheel and press S button for these options:
ADD TO RP adds a generic measurement to the report; user has the option to label
CLEAR
CLEAR ALL
Perform a Labeled Measurement
Application-specific measurements are particular to one study type
The measurement tools and labels are organized by the active imaging mode and
application (e.g., abdomen)
Freeze image
Press MEASURE
Select desired labeled measurement and press Right Select
Place the first caliper and press Right Select
Place second caliper and press Right Select
Move between active calipers (yellow) by pressing ACTION
The system automatically cascades to the next labeled measurement
Selective Deletion of a Measurement
Press POINTER
Position the arrow on the caliper to be deleted (yellow)
Rotate S wheel to CLEAR and press S button to delete measurement
Calculation Reports
Report
Calculation worksheets and reports are offered for each preset when labeled or generic
measurements are entered
Note: Application-specific reports are particular to one study type. Different report
options will be available within each application (e.g., OB).
Press REPORT to activate Reports
Rotate S wheel and press S button for the following options:
Page | 13
© Siemens 2012. All rights reserved.
*The ACUSON P300 System is not commercially available.
Due to regulatory reasons its future availability cannot be guaranteed.
Advertisement
