Advertisement
● Dial the party you want to transfer to, press Call
● Wait until the other party answers to announce the transfer.
● Go on-hook. To return to the call before the transfer destination answers, press
[CANCEL]
(5) Mute
You can disable the microphone or the handset to consult privately with others in the
room while listening to the other party on the phone through the speaker or the
handset.
To set/cancel: [MUTE/AUTO ANS]
● When the icon is blinking on the LCD, Mute is on.
● During Mute, even if you switch from/to speakerphone, Mute will continue.
● During Mute, even if you connect/disconnect a headset, Mute will continue.
(6) To access the FWD/DND settings
● Menu
● [UP]/[DOWN]: "Fwd/DND" → OK
● If the unit has multiple lines, press [UP] or [DOWN] to select the desired line → OK
● [UP]/[DOWN]: Select the type of FWD or DND setting to apply → OK
The settings are as follows:
● DND: Enable Do Not Disturb (All incoming calls are automatically rejected.)
● Fwd (All): Enable Forward All Calls (All incoming calls are forwarded.)
● Fwd (Busy): Enable Forward Busy (Incoming calls are forwarded only when your
extension is in use.)
● Fwd (NA): Enable Forward No answer (An incoming call is forwarded if you do not
answer the call within a certain amount of time.)
Advertisement
