Advertisement
● Do one of the following, depending on your unit:
– For KX-UT113/KX-UT123 users, press [HOLD].
– For KX-UT133/KX-UT136/KX-UT248 users, press [HOLD], and then press the
green flashing flexible button that corresponds to the other party on hold.
(5) Transferring a call
You can transfer a call to another destination (extension or outside party).
For an attended transfer:
● Press [TRANSFER] during a conversation.
● Call the party you want to transfer the call to.
● Wait until the other party answers to announce the transfer.
● Press [Xfer OK].
(6) Mute
You can mute your voice during a conversation. While the mute feature is turned on,
you will be able to hear the other party, but the other party will not be able to hear
you.
The built-in microphone, handset, and headset are all muted when the mute feature
is turned on.
To mute/un-mute, press [MUTE].
(7) Call forwarding/Do not disturb
You can have incoming calls automatically forwarded to another destination. You
can also have incoming calls rejected (Do Not Disturb).
When Call Forwarding or Do Not Disturb is enabled, FWD/DND appears on the
display in stand-by mode.
(8) To access the FWD/DND settings
● In stand-by mode, press Setting or [FORWARD/DO NOT DISTURB]. If you press
[FORWARD/DO NOT DISTURB], continue to step 3.
Advertisement
