Advertisement
UT Range (113, 123, 133, 136, 124)
(1) Holding a call
You can put a call on hold by holding the call at your extension. To hold the current
call press [HOLD] and then go on-hook. To retrieve a call on hold at your extension:
● Go off-hook.
● Do one of the following, depending on your unit:
– For KX-UT113/KX-UT123 users, press [HOLD]
– For KX-UT133/KX-UT136/KX-UT248 users, press the green flashing flexible button
If a call is not retrieved within a specified time, you will hear an alarm as a reminder.
(2) Receiving a second call (answering call waiting)
During a conversation, if a second call arrives, you will hear a call waiting tone. You
can answer the second call by disconnecting or holding the current call. To
disconnect the current call and then talk to the new party:
● Go on-hook while hearing the call waiting tone.
● Go off-hook.
(3) To hold the current call and then talk to the new party:
● For KX-UT113/KX-UT123 users, press [HOLD] while hearing the call waiting tone.
● For KX-UT133/KX-UT136/KX-UT248 users, press [HOLD] while hearing the call
waiting tone and then press the green flashing flexible button.
(4) Talking to two parties alternately (call splitting)
When you are talking to one party and have another party on hold, you can switch
the call on hold and the current call.
● Press [HOLD] during a conversation.
● Call the second party.
Advertisement
