Advertisement
Quick Links
RCBO-AFDD
MCB-AFDD
The outgoing lines may only be
connected or disconnected in a
de-energized state.
LED color-codes
Indicator
Table 1: LED status display for a standard troubleshooting
01
What to do if the AFDD
has tripped?
LED OFF
Blinking RED/GREEN + yellow flag absence
Blinking RED/GREEN + yellow flag presence
Steady RED
Blinking RED/YELLOW
Blinking RED
Steady YELLOW
Blinking YELLOW
Customer:
Date:
Circuit:
Connected load:
01
Perform a diagnostic
1
2
3
LED Status
AFDD is OFF or internal failure
AFDD manually tripped
Overload or Short-Circuit
Residual current fault
Only for RCBO-AFDD
Series arc fault
Parallel arc fault
Overvoltage
Internal failure
Contact the technical support
To test the product:
AFDD is switched off.
1
Press the test button.
Check the status of
2
the LED
(Table 1)
3
Check the status of the
yellow flag.
Advertisement
Related Manuals for hager RCBO-AFDD
Summary of Contents for hager RCBO-AFDD
- Page 1 AFDD is OFF or internal failure Blinking RED/GREEN + yellow flag absence AFDD manually tripped Blinking RED/GREEN + yellow flag presence Overload or Short-Circuit Residual current fault Steady RED Only for RCBO-AFDD Series arc fault Blinking RED/YELLOW Parallel arc fault Blinking RED Steady YELLOW Overvoltage...
- Page 2 Check the electrical Assumption: installation and/or the Overvoltage power supply. LED steady YELLOW Assumption: 1. Switch off load. Residual current fault 2. Do standard electrical troubleshooting. Only for RCBO-AFDD LED steady RED Hager LTD, Hortonwood 50, Telford-TF1 7FT, United Kingdom...
- Page 3 (them) to Check firmware update another circuit temporary. A firmware update avaible. No firmware update avaible. If necessary Perform the firmware update. Contact Hager technical support service as deeper investigation is needed. Hager technical support: +441952675689 technical@hager.co.uk...