hager TK 301 Quick Start Manual

Bus
TP RF
230V~
29 V
TK301 and TK302 pushbuttons are transmit-
ters that are part of the Tebis installation
system and are designed to remotely control
EIB/KNX bus connected output modules.
They can be used for lighting switch
on/off/dimming control.
Configuration
● TX 100 : refer to detailed description in
configurer's instructions (see Dialling of an
input and Assignment of a function)
➀
● Key(s)
: based on the configuration, it
allows to transmit ON or brightness turn up
order (dimming function)
➁
● Key(s)
: based on the configuration, it
allows to transmit OFF or brightness
decreasing order (dimming function).
Functions
● 1 or 2 independent radio control channels
EIB/KNX.
● Battery power supplied
● Display of transmitted order
● Display of battery lifetime end.
➂
LED indicator light signals
➂
LED flashes for 2s after pressing one of the
➀ ➁
keys or : Product not configured.
➂
LED switches on for a short time after
➀
pressing one of the keys or
received and processed.
➂
LED flashes for 4s after pressing one of
➀ ➁
the keys or : Low battery level: replace
batteries as soon as possible.
➂
LED remains switched off after pressing
➀ ➁
one of the keys or : Very low battery
level: Battery replacement required.
Battery replacement
Clip off product front face.
Remove both batteries
Press any key
Insert new batteries matching poles
Clip back on product front face.
Installation
2 options are possible for installing product:
● By screwing (see drilling template), or
● By taping using double-sided adhesive tape
supplied.
Technical characteristics
● Supply voltage: 2 x 1,5V AAA - LR03
● Battery approximate life duration : 5 Years
● Transmission frequency : 868,3 MHz
● Dimensions (L x W x D) : 80 x 80 x 15 mm
● Operating temperature : 0 °C ... +45 °C
● Storage temperature : -20 °C ... +70 °C
● Type of protection : IP 20
● Norms :
EN 60669-1 et EN 60669-2-1
EN 301 489-1 et EN 301 489-3
EN 300 220-1 et EN 300 220-3
TK 301:
Push-button 1-fold
GB
Enkelvoudige drukknop
NL
TK 302:
Push-button 2-fold
Tweevoudige drukknop
tebis
Location and function of the operating display elements
GB
➁
: Order
1
3
2
Fixing diagram
1
!
Usable in all Europe
Declaration of conformity :
We, Hager Electro S.A.S., 132 Boulevard de l'Europe
67215 Obernai Cedex, hereby declare under our own
responsibility that the products dealt with by these
instructions satisfy all essential demands linked to the
R&TTE 1999/5/CE Directive dated March 1999.
The BA Controls Quality Manager/ 01-04
Caution:
- This device must be installed only by
a qualified electrician.
- Conform to TBTS installation rules.
- Not to be installed outside.
60 mm
6T 7166.a