Advertisement
JK11254D
Invicta 3
Instruction leaflet for fitting a 4 pole direct connection kit
Locate and clip the 4 x KR125U (A) connectors onto the DIN rail (B). Fit phase and neutral links
as shown. Fit neutral and phase links to busbar at fixing points (C). Ensure these connections
are tightened to 5Nm.
Connect the incoming cables at fixing points (D), ensuring these connections are tightened to
3.5Nm
Remove the left side cutout from the main incomer shroud (E) and fit to the pan assembly with
the fixing points (F)
(D)
3.5Nm
8mm
(C) 5Nm
(A)
(E)
(B)
(F)
Advertisement
Table of Contents
Related Manuals for hager JK11254D
Summary of Contents for hager JK11254D
- Page 1 JK11254D Invicta 3 Instruction leaflet for fitting a 4 pole direct connection kit Locate and clip the 4 x KR125U (A) connectors onto the DIN rail (B). Fit phase and neutral links as shown. Fit neutral and phase links to busbar at fixing points (C). Ensure these connections are tightened to 5Nm.
- Page 2 Terminal shield KRN199 connection terminals Links M5 carp nuts M6 carp nuts Hager Ltd Hortonwood 50 Telford Shropshire TF7 7FT National Sales Hotline 01952 675612 National Tech Support helpline 01952 675689 Website: www.hagergroup.co.uk Email us @: info@hager.co.uk ZD0684 Issue 4...
Need help?
Do you have a question about the JK11254D and is the answer not in the manual?
Questions and answers