Leds - Rotary Switch - Jumper - Terminal - gefran EXP-ETH-GD-ADV Instruction Manual

1.7. Leds - Rotary switch - Jumper - Terminal

There are two Ethernet diagnostics LEDs on the RJ45 connector on port A of the
card.
Reference Name
Link
PortA
Data
The EXP-ETH-GD-ADV card includes the following hardware diagnostics LED:
Reference Name
H1 RUN
H2 FAIL
H3 PW
The EXP-ETH-GD-ADV card includes a 16-position rotary switch and a 2-position
dip switch for configurations:
Reference Name
S2 Rotary Switch
S1 DIP Switch 2 posizioni
Other:
Reference
P2 JUMPER : if terminals are mounted, the jumper must be installed in position 2-3.
TB1 TERMINAL : If contacts are mounted they must be left NOT CONNECTED.
LEDs Descriptions
Color
yellow Indicates that a connection has been established
green Indicates that data exchange is in progress
LEDs Descriptions
Color
green Indicates that firmware is running on the microprocessor.
red Indicates a system malfunction.
yellow Indicates that the card is connected to the supply voltage.
Rotary switch and dip switch descriptions
Switch di configurazione nodo rete GDnet 1-9 A-F.
Node Number:
0=rete non attiva
1..9 = 1..9
A = 10
B = 11
C = 12
D = 13
E = 14
F = 15
Al momento non usato
Function
Function
Function
Function
EN- 5