Network topology
The following figure shows a connection between the single cards. Address via
rotary switch 1...15.
Minimum node-to-node cable length. Ethernet standards do not specify a mini-
mum recommended cable length.
ADV200
EXP-ETH-GD-ADV200
ADV200
EXP-ETH-GD-ADV200
ADV200
EXP-ETH-GD-ADV200
Example, connection via switch to Gefran PLC.
To avoid possible problems it is recommended that you allow sufficient cable
length to ensure good bend radii on cables and avoid unnecessary strain on con-
nectors.
Switch
PLC
EN- 4