References Menù; Writing Input Data; Fieldbus S2M Menu - gefran EXP-ETH-GD-ADV Instruction Manual

2.2.2.2. REFERENCES Menù
The second word is configured in the "References" menu:
After sending a save command and re-starting the drive, check that the M -> S
channels have been configured correctly as shown (Html page):

2.2.3. Writing Input data

2.2.3.1.

FIELDBUS S2M Menu

These channels are configured in the Fieldbus S2M menu. Use Wcomp to config-
ure the first channel.
S2M configuration is shown below:
EN- 15