Appendix C: System Thermal Results - Onlogic K410 Product Manual

6.3 - Appendix C: System Thermal Results

The thermal performance of the Karbon 400 platform was validated by loading the system to simulate
workloads in excess of expected workloads. That is to say, the system was loaded to run at its full
rated TDP (12W) while also simultaneously stressing memory and storage at different set points
across the system's rated operating temperature range for hours on end. System performance was
reviewed to look for any indication of performance issues or for components operating outside of
their rated temperature range. Samples of data collected during one of these thermal evaluations for
this platform are shown below. The sample data was collected during a test of the K410 chassis with
the x6425E processor, 64 GB of DDR4 RAM and an NVMe storage drive. Of note in these results is the
fact that no significant drops (10% or more) were observed in core frequency or package power.
There were no indications of any throttling in the system throughout the entirety of the test.
31