Mounting Instructions; Wall Mounting (Mtw101) - Onlogic K410 Product Manual

3 - Mounting Instructions

3.1 - Wall Mounting (MTW101)

Step 1: Attach wall mounting brackets to the chassis using the provided screws. To assemble, locate
the four holes in the chassis that line up to the two countersunk holes in each wall mount bracket.
Screw type: M3x0.5 FH 120 Degree
Length: 4 mm
Step 2: Take care to ensure that the brackets are oriented correctly and that the part of the brackets in
contact with the mounting surface is positioned away from the system to ensure a small air gap is
maintained between the mounting surface and the system. Install the four supplied screws.
Step 3: Fasten system to the mounting surface (hardware not provided). The mounting bracket
systems are required to secure 3x the hanging weight of the computer system. The mating substrate
must be capable of maintaining the same rating.
22