Hanseatic HGVI6086B166901S User Manual page 76

Adjusting the appliance door's
accessibility
You can adjust how easy or difficult it is to
open the appliance door. This setting is of-
ten required after the front panel has been
mounted. You can adjust the spring force of
the appliance door by turning the two lower
screws on the back of the appliance. You
must make this adjustment before placing
the appliance in the niche.
• To make the appliance door easier to
open, turn the screws anti-clockwise.
• To make the appliance door more difficult
to open, turn the screws clockwise.
Set-up, connection and initial start-up
Placing the appliance in the niche
1. Fix the two mounting brackets (53) into
the front slots on the top of the appliance
with the screws (49) so that you can screw
the appliance to the worktop later on.
2. Make sure that the outlet hose (28) and
the inlet hose (30) are positioned correctly.
page EN-33
(49)
(53)