Installation - Hanseatic HGVI6086B166901S User Manual

Recess
dimensions
860-910 mm
580 mm

Installation

NOTICE
Risk of damage to property!
Selecting the wrong screws can dam-
age the worktop.
■ Use the screws which are supplied in
the delivery or screws of an appropri-
ate length.
• Only install the dishwasher underneath a
continuous worktop which is joined to the
units adjacent to the dishwasher.
• Maintain sufficient distance from the walls
and adjacent appliances. The measure-
ments of the recess must at least corre-
spond to the details in the diagram above.
Set-up, connection and initial start-up
90°
Inlet/outlet area and
electrical connec-
tion.
Min. 600 mm
90°
80 mm
100 mm
Preparing the appliance
1. Switch the fuse off.
2. Remove cardboard, polystyrene and ad-
hesive strips from the inside, if you have
not already done so.
(44)
3. Affix the enclosed condensation-protec-
tive film (44) to the bottom of the work
surface. In this way, you will avoid dam-
age to the worktop caused by hot steam
emitted from inside the dishwasher when
the appliance door is left open.
page EN-31