Installation; Indoor Unit - Mistral MAS101 Operating Instructions Manual

Installation

1. Secure the mounting plate
• The mounting plate should be attached to the structural part of wall (post etc.)
����� � ����� ��������� �� ����� ������ ���� �� ������� �� ����� �������� ����� �������
� ���� ��� ��������� ����� ��� ����� ��� ����� ������ �� ������ ����� �����
������ �� ��������
2. Drill on the wall
• Confi rm the position of holes, and drill holes of ø65mm on the wall.

INDOOR UNIT

INDOOR UNIT
1. Open the front panel
2. Remove the screw from electrical box cover,
pull the box cover away from the unit and set
aside.
3. Remove the screw from fastener, pull the
fastener away from the unit and set aside.
4. Connect the cable
5. Replace the fastener and electrical box cover.
16