Care And Maintenance - Airwell DDMX-022N-09M25 User & Installation Manual

Care and Maintenance

Cleaning Your Indoor Unit
BEFORE CLEANING OR
MAINTENANCE
ALWAYS TURN OFF YOUR AIR CONDITIONER
SYSTEM AND DISCONNECT ITS POWER SUPPLY
BEFORE CLEANING OR MAINTENANCE.
CAUTION
Only use a soft, dry cloth to wipe the unit clean.
If the unit is especially dirty, you can use a cloth
soaked in warm water to wipe it clean.
Do not use chemicals or chemically treated
•
cloths to clean the unit
Do not use benzene, paint thinner,
•
polishing powder or other solvents to clean
the unit. They can cause the plastic surface
to crack or deform.
Do not use water hotter than 40°C (104°F)
•
to clean the front panel. This can cause the
panel to deform or become discolored.
CAUTION
Before changing the lter or cleaning,
•
turn o the unit and disconnect its power
supply.
Removal and maintenance must be
performed by a certified technician.
When removing lter, do not touch metal
•
parts in the unit. The sharp metal edges can
cut you.
Do not use water to clean the inside of the
•
indoor unit. This can destroy insulation and
cause electrical shock.
Do not expose lter to direct sunlight when
•
drying. This can shrink the lter.
CAUTION
Any maintenance and cleaning of outdoor
•
unit should be performed by an authorized
dealer or a licensed service provider.
Any unit repairs should be performed
•
by an authorized dealer or a licensed
service provider.
Maintenance –
Long Periods of Non-Use
If you plan not to use your air conditioner for an
extended period of time, do the following:
Clean all lters
Turn o the unit and
disconnect the power
Turn on FAN function until
unit dries out completely
Remove batteries
from remote control
Page 11
 