Table of Contents
Advertisement
3.4
Drive mounting
Users can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the bottom-mounting holes.
See
Figure
6,
Figure 7
and
Figure 8
drive:
• Allow a minimum clearance of 0.030 in (0.76mm) around the entire perimeter of the drive for cooling.
• Use only 6-32 UNC mounting screws.
• The screws should be inserted no more than 0.140 in (3.56mm) into the bottom or side mounting holes.
• Do not overtighten the mounting screws (maximum torque: 6 in-lb).
3.4.1
Mechanical specifications
Refer to
for detailed mounting configuration dimensions.
Figure 6
Weight:
8TB model
6TB model
4TB model
2TB model
These dimensions conform to the Small Form Factor Standard documented in
Note
SFF-8301 and SFF-8323, found at
6X 6-32 UNC-2B
.14 THREAD DEPTH
0.169 ± 0.16 x 90
MAX TORQUE: 6 IN-LBS
2X 3.000±.010
2X 1.750±.010
2X 1.432±.020
2X 1.625±.020
3X.125±.010
2.000
Figure 6.
Mounting configuration dimensions 8TB & 6TB models (Option 1)
Note
The image is for mechanical dimension reference only and may not represent the actual drive.
Seagate IronWolf Pro SATA Product Manual, Rev. J
for drive mounting dimensions. Follow these important mounting precautions when mounting the
1.59 lb
720g
1.58 lb
716g
1.43 lb
650g
1.37 lb
620g
www.sffcommittee.org
C L OF DRIVE
C L OF CONN
.814±.020
3X 3.750±.010
C L OF DRIVE
.138±.015
See "Drive mounting" on page 26.
4.000±.010
1.638±.010
1.122±.020
3X .250±.010
BOTH SIDES
6X 6-32 UNC-2B
.14 THREAD DEPTH
0.160 ± 0.10 x 90
MAX TORQUE: 6 IN-LBS
1.028 MAX
[26.10MM]
5.787 MAX
[147.00 MM]
4.000±.010
BREATHER HOLE
DO NOT COVER
26
Advertisement
Table of Contents
