Fujitsu ASUH09LPAS Service Manual page 131

10) Switching functions for external output terminal
Functions of the external output terminal can be switched. For details, refer to "External input and
output".
Function number
60
11) Control switching of external heaters
Sets the control method for external heater to be used.
For details, refer to "External heater output" in
Function
Setting value
number
61
12) Operating temperature switching of external heaters
Sets the temperature conditions when the external heater is ON.
For details, refer to "External heater output" in
Function
Setting value
number
62
1-1. Function settings by using remote controller
Setting value
00
01—04
05
06
07—08
09
10
11
00
01
02
03 Auxiliary heater control by outdoor temperature 1
04 Auxiliary heater control by outdoor temperature 2
05 Auxiliary heater control by outdoor temperature 3
06
07 Auxiliary heat pump control by outdoor temperature 1
08 Auxiliary heat pump control by outdoor temperature 2
09 Auxiliary heat pump control by outdoor temperature 3
Heater: On
00 -5.4 °F (-3 °C)
01 -3.6 °F (-2 °C)
02 -3.6 °F (-2 °C)
03 -5.4 °F (-3 °C)
04 -7.2 °F (-4 °C)
05 -9.0 °F (-5 °C)
Setting description
Operation status
Cooling thermostat On
Heating operation
Operation/Stop
Cooling thermostat On
Error status
Indoor unit fan operation status
External heater
Chapter 2-4. "Details of function"
Setting description
Auxiliary heater control 1
Auxiliary heater control 2
Heat pump prohibition control
Auxiliary heat pump control
Chapter 2-4. "Details of function"
Setting description
-1.8 °F (-1 °C)
-1.8 °F (-1 °C)
-1.8 °F (-1 °C)
-1.8 °F (-1 °C)
-1.8 °F (-1 °C)
-1.8 °F (-1 °C)
- (05-7) -
Factory setting
on page 05-18.
Factory
setting
on page 05-18.
Factory
setting
Heater: Off
1. Function settings
♦
♦
♦