Advertisement
Quick Links
If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the
store where it was purchased. Please call our toll-free customer service number and have your
instructions and parts list ready to provide the model name, part name or factory number:
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
Shelby 72in Fireplace
Model # WSF72SY26C
ADULT ASSEMBLY REQUIRED
Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday
Or visit our website www.whalenfurniture.com
Or e-mail your request to:
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Date 2019-04-22
# WSF72SY26M
1-866-942-5362
parts@whalenfurniture.com
Rev. 0001-A
LOT NUMBER:
DATE PURCHASED: /
/
Advertisement
Related Manuals for Whalen Shelby WSF72SY26C
Summary of Contents for Whalen Shelby WSF72SY26C
- Page 1 LOT NUMBER: DATE PURCHASED: / Shelby 72in Fireplace Model # WSF72SY26C # WSF72SY26M ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased. Please call our toll-free customer service number and have your instructions and parts list ready to provide the model name, part name or factory number: 1-866-942-5362 Pacific Standard Time: 8:30 a.m.
-
Page 2: Quality Guarantee
Should this product be defective in workmanship or materials or fail under normal use, we will repair or replace it for up to one (1) year from date of purchase. Every Whalen Furniture product is designed to meet your highest expectations. We guarantee that you will immediately see the value of our fine furniture. - Page 3 IMPORTANT Before you begin: Open, identify and count all parts prior to assembly. Lay out parts on a flat and non- abrasive surface. You will need the parts identified on page 4 and 5 of this instruction manual. NOTE: IT IS VERY IMPORTANT TO USE GLUE WITH THE DOWELS. EXCESS GLUE CAN BE WIPED OFF WITH A DAMP CLOTH.
-
Page 4: Parts And Hardware List
Parts and Hardware List Please read completely through the instructions and verify that all listed parts and hardware are present before beginning assembly. B- Fixed Shelf (Qty. 1) A- Top Panel (Qty. 1) C- Bottom Panel (Qty. 1) D- Left Side Panel (Qty. 1) E- Right Side Panel (Qty. - Page 5 Parts and Hardware List Please read completely through the instructions and verify that all listed parts and hardware are present before beginning assembly. V- Firebox Support (Qty. 1) Fireplace Insert (Qty. 1) Remote control with battery (Qty. 1) (1) Cam Lock (2) Cam Bolt (3) M8 x 30 mm Wood Dowel (4) #8 x 1-1/2”...
- Page 6 Assembly Instructions 1. Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a carpeted floor or the empty carton to avoid any scratch. 2. Securely screw the Cam Bolts (2) into the designated small holes on the Fixed Shelf (B), Bottom Panel (C), Lower Partitions (F and G) using a Phillips screwdriver, as shown in the illustration.
- Page 7 Assembly Instructions 5. Align and attach the Base Rear Stretcher (O) to the Bottom Panel (C) with three wood dowels (3) and four cam locks (1), as shown. 6. Align and attach the Middle Left Stile (J) to the Left Lower Partition Panel (F) by using two Wood Dowels (3) and three Cam Locks (1).
- Page 8 Assembly Instructions 8. Glue four Wood Dowels (3) into the inner holes of the Lower Partition Panels (F and G) and attach them to the Fixed Shelf (B) by engaging four Cam Locks (1). 9. Glue four Wood Dowels (3) into the bottom holes of the Lower Partition Panels (F and G) and position the Bottom Panel (C) onto the inserted Wood Dowels (3).
- Page 9 Assembly Instructions 10. Securely screw the Cam Bolts (2) into the designated small holes on the Left and Right Side Panels (D and E) using a Phillips screwdriver. 11. Glue three Wood Dowels (3) into the inner holes on the Left Bottom Molding (M) and fasten it to the Left Side Panel (D) with six 1-1/2”...
- Page 10 Assembly Instructions 13. Glue ten Wood Dowels (3) into the large holes on the Bottom Panel (C), Base Rear Stretcher (O) and Fixed Shelf (B) at both ends. 14. Align the large holes on the Left Side Panel (D) with the inserted Wood Dowels (3). Firmly press them together and fasten it in place by engaging five Cam Locks (1).
- Page 11 Assembly Instructions 17. Fasten the Base Front Stretcher (P) to the Side Panels (D and E) with four 1-1/2” Wood Screws (4). 18. Glue six Wood Dowels (3) into the inner holes on the Base Front Molding (L) and attach it to the Base Front Stretcher (P) with twelve 1-1/2”...
- Page 12 Assembly Instructions 19. Stand the assembled unit upright. 20. Fasten the Middle Crossbar Assembly (I) to the Middle Left and Right Stiles (J and K) by attaching two Metal Bracket s (11) at the joints, using two 5/8” Black Screws (7) per Bracket . 21.
- Page 13 Assembly Instructions 23. Insert one Wood Dowel (3) into the inner hole of the Partition Panel (H) and attach it to the Fixed Shelf (B) by engaging two Cam Locks (1). 24. Securely screw six Cam Bolts (2) into the designated small holes on the Top Panel (A) using a Phillips screwdriver.
- Page 14 Assembly Instructions 25. Glue five Wood Dowels (3) into the top inner holes of the Upper Partition Panel (H) and Side Panels (D and E). Position the Top Panel (A) onto the inserted Wood Dowels (3) and fasten it in place with six Cam Locks (1).
- Page 15 Assembly Instructions 28. Insert four Shelf Supports (13) into the holes at the desired height inside each compartment. Tilt and rest the Adjustable Shelves (S) onto the Shelf Supports (13). Note: The doors are shipped with Wood Door Panel. You can keep the doors as they are or interchange with the Door Glass Insert (R) depending on your configuration.
- Page 16 Assembly Instructions 30. Extend the Door Hinges (17) and rest the hinge cups onto the cutouts of one Door Panel (Q). Secure the Door Hinges (17) in place by using two 5/8” Zinc Screws (9) in each. 31. Attach one Knob (14) to the front side of the Door with one Knob Bolt (15). 32.
- Page 17 Assembly Instructions 36. Plug the Cam Lock Covers (12) onto the visible cams locks to conceal the cams. 37. Stick the Rubber Bumpers (16) on the outer corners of Doors (Q) where they meet the partition panels (F and G). 38.
- Page 18 Assembly Instructions Electric Firebox 39. Align and attach the Firebox Support (V) to the Bottom Panel (C) by inserting two 2” Self-tapping Screws (10) through the countersunk holes and screw into place. NOTE: You must install the Acrylic TV Stopper to prevent the TV from tipping when placing your flat panel television directly on the console.
- Page 19 Assembly Instructions Tools required (not provided): Phillips screwdriver, stud finder, power drill and 3 mm/0.1 in drill bit. 42. Ask for assistance to position the assemble fireplace at the desired location against a wall. If necessary, adjust the pre-attached Floor Levelers at the bottom of the Base Front Molding (L) to level the unit. Now, follow the instructions printed on the plastic bag containing the Tipping Restraint Hardware to attach the tip-over restraints to the unit and the wall.
-
Page 20: Care And Maintenance
Care and Maintenance Use a soft, clean cloth that will not scratch the surface when dusting. Use of furniture polishes is not necessary. Should you choose to use polishes, test first in an inconspicuous area. Using solvents of any kind on your furniture may damage the finish. ...