Table of Contents
Advertisement
Unscrew and remove the screws in
1.
the vertical transport struts using a
T20 screwdriver.
Remove the transport struts.
2.
Undo and remove the screws in
3.
the horizontal transport strut using
a T20 screwdriver.
Remove the transport strut.
4.
Installation and connection en
Connecting the appliance
Connect your appliance to the power
supply, water inlet and water outlet.
Connecting the water inlet hose
Note: Please read the information in
the "Safety" → Page 4 and "Prevent-
ing material damage" → Page 11 sec-
tions to ensure that you use the appli-
ance safely.
WARNING
Risk of electric shock!
The appliance contains live parts.
Touching live parts is dangerous.
Do not immerse the electrical
▶
AquaStop valve in water.
Connect the water inlet hose to a
1.
tap (26.4 mm = 3/4").
Open the water tap carefully and
2.
check that the connection points
are tight.
¾˝
min.
10 mm
min.
17 mm
17
Advertisement
Table of Contents
