Cleaning And Maintenance; Service Centre - Probuilder 99007 Instruction Manual

Cleaning and maintenance

Check regularly that all nuts and bolts are
tightened properly.
Use a brush to remove any � lings and dirt
from the mitre saw stand.
Stubborn dirt can be removed using a well-
wrung cloth.
The mitre saw stand must not be washed or
high-pressure washed.
Regularly lubricate all bolts and nuts using
acid-free oil or lubricating spray.
Fold the mitre saw stand up and store it in a
dry, dust-free location indoors when it is not
in use.

Service centre

Note: Please quote the product model
number in connection with all inquiries.
The model number is shown on the front of
this manual and on the product rating plate.
For:
• Complaints
• Replacements parts
• Returns
• Guarantee issues
• www.schou.com
Manufactured in P.R.C.
Manufacturer:
Schou Company A/S
Nordager 31
DK-6000 Kolding
© 2019 Schou Company A/S
All rights reserved. The content of this manual may not
be reproduced, either in full or in part, in any way by
electronic or mechanical means, e.g. photocopying or
publication, translated or saved in an information storage
and retrieval system without written permission from
Schou Company A/S.
GB
21