Cleaning And Maintenance - Probuilder 75997 Instruction Manual

Fit the 2 side pieces and 2 cross-pieces in
the 2 top holes on the same post parts.
Then � t another 2 side pieces and 2 cross-
pieces at any height.
Assemble the other part of the unit by
� tting 2 side pieces and 2 cross-pieces in
the 2 top holes on the 4 remaining post
parts.
Then � t 2 side pieces and 2 cross-pieces
in the 7th and 8th hole, counting from the
bottom.
Place the shelves (D) in the unit and insert
end plugs (E) into the top of each post (A).
30
7. + 8.
Push the unit together and clip the posts
together using the clips (G).

Cleaning and maintenance

Wipe the unit down regularly with a well-
wrung cloth.
Any scratches on the surface of the posts
should be treated with a rust-proo� ng
agent.