Thank you for purchasing a moisture meter from PCE Instruments. With the PCE-PMI 2 you can measure the moisture contents of different materials quickly and easily. There is a variety of pre-set densities available for different materials like cork, different types of wood or cement.
< 90 % RH Dimensions 165 x 62 x 26 mm Weight 119 g (without batteries) Delivery contents 1 x PCE-PMI 2 4 x 1.5 V AAA batteries 1 x carrying case 1 x instruction manual Operation Start-up procedure Before you can use the device, you have to install the batteries. To do so, take the device and open the battery compartment on the back.
Page 4
Manual 4.2.3 Select the density To select the density of the material to be measured, press the “SEL” button. Now the display shows a code, for example “Cd 12”. Press the “HOLD” button to go to the next code or press the “ZERO” button to go to the previous code.
Page 5
In order to comply with the EU directive 2012/19/EU we take our devices back. We either re-use them or give them to a recycling company which disposes of the devices in line with law. If you have any questions, please contact PCE Instruments. Contact If you have any questions about our range of products or measuring instruments please contact PCE Instruments.
Need help?
Do you have a question about the PCE-PMI 2 and is the answer not in the manual?
Questions and answers