User Settings; Changing User Settings - V-ZUG V6000 A905 Operating Instructions Manual

5 User settings

Touch the
5 User settings
The following user settings can be set and saved individually:
User setting
P0 Acoustic signal
loudness
Acoustic signal at
P1
end of operating
time / timer
P3 Automatic boost
Default operating
P4
time / timer
duration
P5 Acoustic signal
when buttons are
pressed
Restore factory
P6
settings
5.1

Changing user settings

▸ With the hob switched off, simultaneously hold the
3 seconds.
– An acoustic signal is emitted.
▸ Hold both sliders to the left of display 3 depressed at the same time until an acoustic
signal is emitted.
– The user setting, e.g.
– The current user setting value is shown in display 2.
1 2
▸ Use the button to select the next highest and the
setting.
▸ Touch or swipe slider 1 to select a higher or lower setting value.
14
button to switch the appliance off at any time.
Setting value
0 Low
1 Medium
2 High
0 No acoustic signal
1 Automatically off after 10 secs.
2 Automatically off after 1 min.
0 Automatic boost off
1 Automatic boost on
0 Default duration 0 mins.
1–9 Adjustable in steps from 10–90 mins.
0 Acoustic signal off
1 Acoustic signal on
0
To restore factory settings: Hold the
depressed for 2 seconds.
, appears in display 3.
button
and buttons depressed for
3
button the next lowest user
Factory
setting
2
2
1
3
1
0