User Settings; Changing User Settings - V-ZUG V6000 A804B Operating Instructions Manual

▸ Wipe protection is switched off by touching the
30 seconds.
Touch the
5

User settings

The following user settings can be set and saved individually:
User setting
P0 Acoustic signal
loudness
P1 Acoustic signal at end of
operating time / timer
Automatic boost
P3
P4 Default operating time /
timer duration
Acoustic signal when
P5
buttons are pressed
P6 Restore factory settings
5.1

Changing user settings

▸ With the hob switched off, simultaneously hold the
3 seconds.
– An acoustic signal is emitted.
▸ Hold both sliders to the left of display 3 depressed at the same time until an acoustic
signal is emitted.
– The user setting, e.g.
– The current user setting value is shown in display 2.
1 2
▸ Use the button to select the next highest and the
setting.
button to switch the appliance off at any time.
Setting value
0 Low
1 Medium
2 High
0 No acoustic signal
1 Automatically off after 10 secs.
2 Automatically off after 1 min.
0 Automatic boost off
1 Automatic boost on
0 Default duration 0 mins.
1–9 Adjustable in steps from 10–90 mins.
0 Acoustic signal off
1 Acoustic signal on
0 To restore factory settings: Hold the
button depressed for 2 seconds.
, appears in display 3.
button again or automatically after
and buttons depressed for
button the next lowest user
5 User settings
Factory
setting
2
2
1
3
1
0
3
15