Troubleshooting; Camera Care - Mamiya 6 User Manual

Uniquely designed to prevent mistakes, the New Mamiya 6
incorporates numerous safety features.
If the shutter will not function, it is very likely due to user
error rather than camera malfunction. Should something
appear to go wrong, be sure to review the following points.
frame?
Have all the exposures already been made (12 with
120, 24 with 220)?
(In the case of examples 0 - 0, the red LED will
flash a warning on the upper right side of the view-
finder.
33
returned to use at normal temperatures.
Avoid quick heating or cooling as unstable voltage may result.
An automatic circuit will signal battery depletion.
When the shutter release button is touched slightly, an LED
blinks to indicate a suitable shutter speed. A few exposures can
be made, but replace the batteries as soon as possible.
When the batteries are depleted, the LED ceases to light and
the shutter cannot be released.
Replace both batteries at the same time. Avoid using old
l
batteries with new ones, and avoid mixing different types
of batteries.
* When inserting batteries in the battery chamber, verify correct
polarity. If contaminated with oil, sweat or other foreign matter,
be sure to wipe clean with a dry cloth or lens tissue.