Q-tran QTM-eLED+DALI-DT6 Manual page 2

QTM-eLED+DALI-DT6
Housing
•
18 gauge welded steel enclosure: 14.5"W x 8.00"H x 4.00"D
•
Door: 15.5"W x 9.00"H
•
Knockouts: 25
•
Built-in support bracket incorporated to secure housing for surface mounting
Performance
•
Power Supply
: Rated for surface mount or recessed use
: Fully rated to operate low voltage load at listed wattage (No derating required)
: Voltage regulation to 2% or less of rated output voltage
: The ability to be dimmed using DALI 2 DT-6 dimming
: Universal input range of 120-277 Vrms
•
Low Voltage Lighting Systems
: CSA Class 3425-15 and Class 3425-95
: Short circuit protection (SCP)
: Over voltage protection (OVP)
: Over current protection (OCP)
: Live tested by the manufacture to ensure proper operation
: Manufacturer offers a minimum of 5 years warranty
•
Limited output voltage and current, plus isolation for safe operation
•
Controllable by DALI 2 protocol
•
DALI dimming down to 0.2%
•
Fully potted driver(s) for moisture resistance
•
Suitable for dry and damp locations
•
Suitable for surface or recessed mounting use
•
Primary voltage - universal (120-277V)
•
Wide operating temperature range: -4˚F to 122˚F
•
Fits up to (3):100W 24 VDC driver(s) and DALI decoder module(s)
•
5 years warranty
© 2022 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com
14.5"
GND
HOT
NEU
LED POWER SUPPLY 100W–300W
V-
V-
V+
V+
+
D1+ 1(-)
D1- 2(-)
D2+ 3(-)
D2- 4(-)
V-
V-
V+
V+
+
D1+ 1(-)
D1- 2(-)
D2+ 3(-)
D2- 4(-)
V-
V-
V+
V+
+
D1+ 1(-)
D1- 2(-)
D2+ 3(-)
D2- 4(-)
•
Terminal blocks is made of tin plated copper
with a voltage rating of 300V and a current
rating of 40A
•
Driver has Class A sound rating
•
Class 2 output
•
CSA #239924
Low Voltage Lighting Systems
: CSA class 3425-15 and class 3425-95
: CSA standard C22.2 No. 250.0-08 - Luminaires
: ANSI/ UL standard2108 - Low voltage lighting systems
: CSA standard C22.2 No 250.13-14 - Light emitting diode (LED) equipment for lighting
applications
: ANSI/ UL standard8750 - Light emitting diode (LED) equipment for use in lighting
products
COMPLIANT
.875"
BOTTOM
9 Knockouts of 0.875" Hole
for 1/2" fitting
16 additional side knockouts
NOTE:
Specification subject to change. Rev-11-15-22