Q-tran QTM-eLED+DALI-DT6 Manual page 10

INSTALLATION
CSA Requirements
•
Suitable for indoor use
•
This power supply must be installed according to the National Electric Code and local codes and ordinances and in accordance with
applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
•
Wear rubber shoes and work on a sturdy wooden or fiberglass ladder.
•
This power supply is to be installed in a location where it is not likely to be contacted by non-electricians.
•
To avoid a hazard to children, account for all parts and destroy all packaging materials.
QTM-eLED+DALI
Model
QTM-eLED-100+DALI
QTM-eLED-200+DALI
QTM-eLED-300+DALI
● Type Ic Recessed, Inherently Protected
Type IC ENCASTRE, PROTECTION INHÉRENTE
● For Supply Connections Use Wire Rated for At Least 60C.
Pour les connexions d'alimentation, utilisez des fils
calibrés pour au moins 60C.
● Suitable For Damp Locations
CONVIENT AUX EMPLACEMENTS HUMIDES
● Class 2
Classe 2
© 2021 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com
LED POWER SUPPLY - QTM-eLED+DALI-DT6
QTM-eLED+DALI
C/US
INPUT VOLTAGE
120V - 277V
Input Voltage Input Current Frequency Nominal Output
(V) (A)
120 / 277 0.95 / 0.40 50/60
120 / 277 1.90 / 0.80 50/60
120 / 277 2.85 / 1.20 50/60
This product must be installed in accordance with the applicable
installation code by a person familiar with the construction and
operation of the product and the hazards involved.
CE PRODUIT DOIT ÊTRE INSTALLÉ SELON LE CODE D'INSTALLATION
PERTINENT, PAR UNE PERSONNE QUI CONNAÎT BIEN LE PRODUIT ET
SON FONCTIONNEMENT AINSI QUE LES RISQUES INHÉRENTS.
6.00"
OUTPUT VOLTAGE
CONTROL TYPE
24V
Nominal Output
Voltage (VDC) Wattage (W)
24 100
24 200
24 300
LOW VOLTAGE
LIGHTING SYSTEM
CLASS: 3425 - 95
Q-TRAN, INC.
3402 - 95
MILFORD, CT U.S.A.
(203) 367-8777
WWW.Q-TRAN.COM
Specification subject to change. Rev-11-15-22
DT6
DT8