Table of Contents
Advertisement
Quick Links
Model No.
MP713
230V AC 50Hz 0.56A
In order to ensure correct and safe usage of your battery charger, you should read these instructions
SAFETY
Ensure that cables are regularly inspected and kept in good condition.
Never use the battery charger if the mains lead or plug is damaged.
Never use the battery charger if the output leads or crocodile clips are damaged.
Never use the battery charger if it has been dropped or damaged in any way.
WARNING: Battery charging produces explosive gases. Prevent flames and sparks. Provide adequate
ventilation during charging.
For indoor use and storage only, do not expose to rain or any other forms liquid or moisture.
The charger must not be used as a DC power source or for any purposes other than those listed.
The charger must not be used for the charging of non-rechargeable batteries.
It is not recommended that a charging battery be left unattended for long periods or overnight.
Replacement of the mains cable should only be carried out by the manufacturer, its service agent or a suitably
qualified electrician / electrical technician in order to avoid a hazard. There are no user-serviceable parts in
this product. Modifications or attempted repairs by unsuitable persons will render the product warranty void.
GENERAL SAFETY
This battery charger can be used by children aged from 8 years and above, and persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way, and understand the hazards involved.
Children must not play with this battery charger. Cleaning and user maintenance shall not be carried out by
children without supervision.
GASES
The charging process produces flammable and explosive gases - the area in which charging takes place
should be kept well ventilated. Only connect and disconnect the battery leads when the mains supply is
disconnected. Avoid flames or sparks! Do not smoke!
MP713 12V / 8A (max) Battery Charger
Instruction and information manual
Rated Input
EN Rated Output
12V DC 5 Amp
carefully. Please store these instructions for future reference.
Peak Output
Battery Type
8 Amp
12V Lead-acid
Battery
Capacity
20-90 Ah
Advertisement
Table of Contents
Related Manuals for MayPole MP713
Summary of Contents for MayPole MP713
- Page 1 MP713 12V / 8A (max) Battery Charger Instruction and information manual Battery Model No. Rated Input EN Rated Output Peak Output Battery Type Capacity MP713 230V AC 50Hz 0.56A 12V DC 5 Amp 8 Amp 12V Lead-acid 20-90 Ah In order to ensure correct and safe usage of your battery charger, you should read these instructions carefully.
- Page 2 WORKING WITH LEAD ACID BATTERIES Use of safety goggles and gloves when working with lead acid batteries is strongly advised. Avoid contact with the electrolyte as this is acidic and is likely to cause burns to the skin or clothes. If this occurs you should rinse the affected area with plenty of water immediately.
- Page 3 4. CHARGING. Consider the position of the charger carefully; ensure it is used away from combustible materials. Insert the battery charger mains plug into the mains supply (230 Volts AC only) and switch the outlet on. WARNING! DO NOT ATTEMPT TO START THE VEHICLE WITH THE CHARGER CONNECTED. THIS MAY BLOW THE OUTPUT FUSE OR DAMAGE YOUR BATTERY CHARGER.
- Page 4 3) Check to see that the positive and negative leads are connected to the correct terminals. DECLARATION OF CONFORMITY We declare that the product conforms to the following directives 73/23 CEE, 93/68 CEE, 2004/108/EC, 2002/95/EC (ROHS), EN60335-1, EN60335-2-29, EN50366 Technical Manager Maypole Ltd January, 2015 EMAIL : SALES@MAYPOLE.LTD.UK WEB : WWW.MAYPOLE.LTD.UK...
Need help?
Do you have a question about the MP713 and is the answer not in the manual?
Questions and answers