Advertisement

Quick Links

Model No.
Rated Input
MP7418
230V AC 50Hz 108W
MP74112
230V AC 50Hz 158W
In order to ensure correct and safe usage of your battery charger, you should read
these instructions carefully. Please store these instructions for future reference.

SAFETY

Ensure that cables are regularly inspected and kept in good condition.
Never use the battery charger if the mains lead or plug is damaged.
Never use the battery charger if the output leads or crocodile clips are damaged.
Never use the battery charger if it has been dropped or damaged in any way.
WARNING: Battery charging produces explosive gases. Prevent flames and sparks.
Provide adequate ventilation during charging.
Do not leave charging batteries unattended for long periods or overnight.
Use "NORMAL" charge setting for discharged batteries.
Do not operate the charger above its rated output for long periods.
Monitor charging to ensure that a decreasing level of charge is occurring.
Electrical repairs or replacement of the mains cable should only be carried out by the
manufacturer, its service agent or a suitably qualified electrician / electrical technician in
order to avoid a hazard.

GENERAL SAFETY

This battery charger can be used by children aged from 8 years and above, and persons
with reduced physical, sensory or mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning use of the appliance in a safe
way and understand the hazards involved. Children must not play with this battery charger.
Cleaning and user maintenance shall not be carried out by children without supervision.

GASES

The charging process produces flammable and explosive gases - the area in which charging
takes place should be kept well ventilated. Only connect and disconnect the battery leads
when the mains supply is disconnected. Avoid flames or sparks! Do not smoke!
EN Rated Output
12V DC 5.6 Amp (High) / 3.6 Amp (Low)
6V DC 5.6 Amp (High) / 2.5 Amp (Low)
12V DC 8.4 Amp (High) / 6 Amp (Low)
6V DC 8.4 Amp (High) / 5.2 Amp (Low)
1
Peak Output
Battery Capacity
8 Amp
9 - 112 Ah
12 Amp
40 - 120 Ah

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MP7418 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for MayPole MP7418

  • Page 1 Rated Input EN Rated Output Peak Output Battery Capacity 12V DC 5.6 Amp (High) / 3.6 Amp (Low) MP7418 230V AC 50Hz 108W 8 Amp 9 - 112 Ah 6V DC 5.6 Amp (High) / 2.5 Amp (Low) 12V DC 8.4 Amp (High) / 6 Amp (Low)
  • Page 2 POINTS TO NOTE When not in use store the charger in a dry place to avoid moisture damage. Your Maypole Battery Charger is suitable for INDOOR USE ONLY. Avoid exposure to rain or liquids at all time. The Battery Charger should not be opened. Any attempt at modification or repair by the user will result in the loss of our guarantee.
  • Page 3 D) OUTPUT SELECTION WARNING ! All selections & connections must be made before the battery charger is switched on. Set the 6V/12V switch to match the voltage of the battery. If you are charging a small battery or you only require a slower rate of charge, set the switch on the front panel to “NORMAL”.
  • Page 4 3) Check to see that the positive and negative leads are connected to the correct terminals. DECLARATION OF CONFORMITY We declare that the product conforms to the following directives 73/23 CEE, 93/68 CEE, 2004/108/EC, 2002/95/EC (ROHS), EN60335-1, EN60335-2-29 Technical Manager Maypole Ltd, 2013 SALES@MAYPOLE.LTD.UK WWW.MAYPOLE.LTD.UK June 2014...

This manual is also suitable for:

Mp74112

Table of Contents

Save PDF