MayPole MP7403 Instruction And Information Manual

MayPole MP7403 Instruction And Information Manual

12/6v 1.5a maintenance smart charger

Advertisement

Quick Links

In order to ensure correct and safe usage of your battery charger, you should read these
instructions carefully. Please retain these instructions for future reference.

SAFETY

Ensure that cables are regularly inspected and kept in good condition.
Never use the battery charger if the mains lead, mains plug, output lead or crocodile clips are
damaged.
Never use the battery charger if it has been dropped or damaged in any way.
Warning: Battery charging produces explosive gases.
adequate ventilation during charging.
Keep the charging area completely clear of combustible materials.
For indoor use only, do not expose to rain or any other forms of liquid or moisture.
The charger must not be used as a continuous DC power source or for any purposes other than those
listed.
The charger is designed to charge Lead-Acid & AGM batteries only and must not be used for the
charging of non-rechargeable batteries. Never attempt to charge a frozen battery.
There are no user-serviceable parts in this product other than the fuse in the mains plug. Opening the
case is dangerous and electrical repairs or replacement of the mains cable should only be carried out
by the manufacturer, its service agent or a suitably qualified electrician / electrical technician in order
to avoid a hazard. Resultant damage to the product will result in the loss of your guarantee.

GENERAL SAFETY

This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety. Children must be
supervised to ensure that they do not play with the appliance. Cleaning and user maintenance must not be
undertaken by children without supervision.
Gases: The charging process produces flammable and explosive gases - the area in which charging takes
place should be kept well ventilated. Only connect and disconnect the battery leads when the mains supply
is disconnected. Avoid flames or sparks! Do not smoke!
Cables: Make sure mains lead is located so that it will not be stepped on, tripped over, or otherwise subjected
to damage. An extension cord should not be used unless absolutely necessary. Improper use of an extension
cord could result in a risk of fire and electric shock. If an extension cord must be used, make sure it is in good
electrical condition.
MP7403 12/6V 1.5A Maintenance Smart Charger
Instruction and Information Manual
1
Prevent flames and sparks.
Provide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MP7403 and is the answer not in the manual?

Questions and answers

Summary of Contents for MayPole MP7403

  • Page 1 MP7403 12/6V 1.5A Maintenance Smart Charger Instruction and Information Manual In order to ensure correct and safe usage of your battery charger, you should read these instructions carefully. Please retain these instructions for future reference. SAFETY  Ensure that cables are regularly inspected and kept in good condition.
  • Page 2 Short circuit: Batteries store large amounts of energy. Avoid short circuits which could result in a dangerous electrical discharge that could result in personal injury and / or damage to equipment and property. Take extra care when using tools around a battery, remove personal metal items such as rings, bracelets, necklaces, and watches when working with a lead-acid battery as a short circuit may result in severe burns or cause an explosion.
  • Page 3 PREPARATION OF THE BATTERY Check the voltage and capacity of the battery to be charged. In the case of lead-acid batteries, firstly remove the caps from each cell and check the level of liquid. If it is below the recommended level, top up with deionized or distilled water.
  • Page 4 WARNING It is recommended that charging should be supervised at all times. Monitor the temperature of the battery during charging. If the temperature of the battery exceeds 40 C cease charging until the battery has cooled to a safe temperature. Failure to do so may result in the battery exploding. 3.
  • Page 5 Charging Function Table Program Technical requirement Remark “POWER” LED will be on when charger is connected to power Mains Power 230VAC source. If clamps are not connected, reverse polarity or short Check 50Hz circuit the ”ERROR” LED will be illuminated. Switch off charger, select the correct Incorrect charge voltage selection charging voltage for the battery and...
  • Page 6 6. WARNING: All other service should be done by qualified personnel only. DECLARATION OF CONFORMITY We declare that this product conforms to the following standards EN60335-1, EN60335-2-29, EN55014, EN61000, and the following Directives 73/23 CEE, 93/68 CEE, 2004/108/EC, 2002/95/EC (ROHS) Technical Manager Maypole Ltd September, 2016 EMAIL : sales@maypoleltd.co.uk WEB :...

Table of Contents