MayPole MP7428 Instruction And Information Manual

MayPole MP7428 Instruction And Information Manual

Electronic smart charger

Advertisement

Quick Links

In order to ensure correct and safe usage of your battery charger, you should read these
instructions carefully. Please retain these instructions for future reference.
SAFETY
Ensure that cables are regularly inspected and kept in good condition.
Never use the battery charger if the mains lead, mains plug, output lead or crocodile clips are
damaged.
Never use the battery charger if it has been dropped or damaged in any way.
WARNING: Battery charging produces explosive gases.
adequate ventilation during charging.
Keep the charging area completely clear of combustible materials.
For indoor use only, do not expose to rain or any other forms of liquid or moisture.
The charger must not be used as a continuous DC power source or for any purposes other than those
listed.
The charger is designed to charge Lead-Acid & AGM batteries only and must not be used for the
charging of non-rechargeable batteries. Never attempt to charge a frozen battery.
There are no user-serviceable parts in this product other than the fuse in the mains plug. Opening the
case is dangerous and electrical repairs or replacement of the mains cable should only be carried out
by the manufacturer, its service agent or a suitably qualified electrician / electrical technician in order
to avoid a hazard. Resultant damage to the product will result in the loss of your guarantee.
GENERAL SAFETY
This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety. Children must be
supervised to ensure that they do not play with the appliance. Cleaning and user maintenance must not be
undertaken by children without supervision.
Gases: The charging process produces flammable and explosive gases - the area in which charging takes
place should be kept well ventilated. Only connect and disconnect the battery leads when the mains supply
is disconnected. Avoid flames or sparks! Do not smoke!
Cables: Make sure mains lead is located so that it will not be stepped on, tripped over, or otherwise subjected
to damage. An extension cord should not be used unless absolutely necessary. Improper use of an extension
cord could result in a risk of fire and electric shock. If an extension cord must be used, make sure it is in good
MP7428 12V 8A Electronic Smart Charger
Instruction and Information Manual
1
Prevent flames and sparks.
Provide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MP7428 and is the answer not in the manual?

Questions and answers

James Joicey-Cecil
April 8, 2025

Can I leave the maypole 7428 permanently connected to a 12v battery (for a generator) to ensure it is always topped up?

1 comments:
Mr. Anderson
April 9, 2025

No. The MayPole MP7428 charger must not be used as a continuous DC power source or for any purposes other than charging.

This answer is automatically generated

Subscribe to Our Youtube Channel

Summary of Contents for MayPole MP7428

  • Page 1 MP7428 12V 8A Electronic Smart Charger Instruction and Information Manual In order to ensure correct and safe usage of your battery charger, you should read these instructions carefully. Please retain these instructions for future reference. SAFETY  Ensure that cables are regularly inspected and kept in good condition.
  • Page 2: General Information

    electrical condition. Short circuit: Batteries store large amounts of energy. Avoid short circuits which could result in a dangerous electrical discharge that could result in personal injury and / or damage to equipment and property. Take extra care when using tools around a battery, remove personal metal items such as rings, bracelets, necklaces, and watches when working with a lead-acid battery as a short circuit may result in severe burns or cause an explosion.
  • Page 3: Battery Charging Instructions

    BATTERY CHARGING INSTRUCTIONS Please read your vehicle manufacturer’s instructions for further information and advice regarding charging and the disconnection of the battery for charging purposes. IMPORTANT: This charger will only recover 12V batteries with a minimum residual voltage of 1.5V. If the residual voltage is lower than above figure, the charger will not operate.
  • Page 4: When Charging Is Complete

    The 9 step automatic charging program includes:  Battery condition diagnosis  Recovery with pulse charging  Battery preparation with soft start  Automatic current selection & bulk charging - charging with constant current  Constant voltage absorption charging  Resting and condition monitoring period ...
  • Page 5: Technical Specifications

    CAR BATTERY MAINTENANCE It is essential to keep your battery regularly charged up throughout the year, especially during the winter months. In the winter the effectiveness of your car battery is reduced by the cold. Oil is thick, engines are difficult to start and the heater, windscreen wipers and lights are all draining power.
  • Page 6: Maintenance Instructions

    6. WARNING: All other service should be done by qualified personnel only. DECLARATION OF CONFORMITY We declare that this product conforms to the following standards EN60335-1, EN60335-2-29, EN55014, EN61000, and the following Directives 73/23 CEE, 93/68 CEE, 2004/108/EC, 2002/95/EC (ROHS) Technical Manager Maypole Ltd September, 2016 EMAIL : sales@maypole.ltd.uk WEB :...

Table of Contents